{"title":"Butterfly Lexus\/Toyota","description":null,"products":[{"product_id":"butterfly-system-glanz-3p-aero-set-frp-for-lexus-ls460-600h-usf40-2007-2009","title":"Butterfly System GLANZ 3P Aero Set (FRP) for Lexus LS460\/600h (USF40) 2007-2009","description":"\u003ch3\u003e\u003cstrong\u003eButterfly System GLANZ 3P Aero Set (FRP) for Lexus LS460\/600h (USF40) 2007-2009\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eMade by Butterfly System in Japan, the Butterfly System GLANZ 3-Piece Aero Kit is part of GLANZ, Butterfly System's core VIP aero line. It gives the Lexus LS460 (USF40) early a lower, cleaner stance with three matched pieces.\u003c\/p\u003e\n\u003cp\u003eAll Butterfly System parts ship unpainted in FRP and are made to order. Plan on test-fitting, preparation and paint before installation; an experienced body shop is recommended. Photos show the manufacturer's demo car, which uses two-tone paint and the separately sold LED red lens where applicable.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eIncluded Components\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront half spoiler\u003c\/li\u003e\n\u003cli\u003eSide flaps (left and right)\u003c\/li\u003e\n\u003cli\u003eRear half spoiler\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSold Separately\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear wing\u003c\/li\u003e\n\u003cli\u003eDedicated LED red lens for the rear half spoiler center duct (needed to finish the duct as shown on the demo car; requires wiring)\u003c\/li\u003e\n\u003cli\u003eDedicated LED flasher (not road-legal)\u003c\/li\u003e\n\u003cli\u003eRear LED fog lamp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAll parts are add-on types and require drilling; front and rear also require fitting adjustment.\u003c\/li\u003e\n\u003cli\u003eApproximate drop vs. stock: front 30-50 mm, sides 20 mm, rear 30-50 mm.\u003c\/li\u003e\n\u003cli\u003eRear half spoiler works with the factory muffler; center duct is designed for the separately sold LED.\u003c\/li\u003e\n\u003cli\u003eVehicles with factory aero parts must have them removed before installation.\u003c\/li\u003e\n\u003cli\u003eSide flaps are not compatible with long-wheelbase vehicles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Butterfly System (Fukuoka, Japan)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e GLANZ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJDM Application:\u003c\/strong\u003e Lexus LS460 \/ LS600h early model — JDM production Sep 2006 to Sep 2009. Not for 2010+ facelift models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUS Application:\u003c\/strong\u003e Lexus LS460 standard wheelbase (USF40 RWD \/ USF45 AWD), 2007-2009 US model years. Long-wheelbase LS460 L (USF41\/46) and LS600h L (UVF46): front and rear half spoilers are listed for these chassis, but the side flaps do not fit long-wheelbase cars, so this complete kit does not fit them. All US LS600h models were long-wheelbase LS600h L.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct:\u003c\/strong\u003e Body Kit (3-Piece)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Front half spoiler, Side flaps (left and right), Rear half spoiler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e FRP (fiberglass reinforced plastic)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Unpainted; requires paint before installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Professional installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Butterfly System Glanz","offers":[{"title":"Default Title","offer_id":53294412955945,"sku":"BFS-3P-FR-USF40K","price":2247.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/9586\/6153\/files\/BFS-3P-FR-USF40K-01.jpg?v=1782688454"},{"product_id":"butterfly-system-glanz-3p-aero-set-frp-for-lexus-ls400-ucf20-1995-1997","title":"Butterfly System GLANZ 3P Aero Set (FRP) for Lexus LS400 (UCF20) 1995-1997","description":"\u003ch3\u003e\u003cstrong\u003eButterfly System GLANZ 3P Aero Set (FRP) for Lexus LS400 (UCF20) 1995-1997\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThis Butterfly System GLANZ 3-Piece Aero Kit is part of GLANZ, Butterfly System's core VIP aero line. Butterfly System, based in Fukuoka, Japan, designs it around the factory body of the Lexus LS400 \/ Toyota Celsior (UCF20) early so the front, sides and rear share one low VIP profile.\u003c\/p\u003e\n\u003cp\u003eAll Butterfly System parts ship unpainted in FRP and are made to order. Plan on test-fitting, preparation and paint before installation; an experienced body shop is recommended. Photos show the manufacturer's demo car, which uses two-tone paint and the separately sold LED red lens where applicable.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eIncluded Components\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront half spoiler\u003c\/li\u003e\n\u003cli\u003eSide steps (left and right)\u003c\/li\u003e\n\u003cli\u003eRear half spoiler\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSold Separately\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear wing\u003c\/li\u003e\n\u003cli\u003eDedicated LED red lens for the rear half spoiler center duct (needed to finish the duct as shown on the demo car; requires wiring)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear half spoiler works with the factory muffler.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Butterfly System (Fukuoka, Japan)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e GLANZ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJDM Application:\u003c\/strong\u003e Toyota Celsior 20 Series (UCF20\/21), early model — JDM production Oct 1994 to Jul 1997\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUS Application:\u003c\/strong\u003e Lexus LS400 (UCF20), 1995-1997 US model years — designed on the JDM Toyota Celsior; US-market bumpers are not separately confirmed by the manufacturer. Test-fit before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct:\u003c\/strong\u003e Body Kit (3-Piece)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Front half spoiler, Side steps (left and right), Rear half spoiler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e FRP (fiberglass reinforced plastic)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Unpainted; requires paint before installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Professional installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Butterfly System Glanz","offers":[{"title":"Default Title","offer_id":53294416560425,"sku":"BFS-3P-FR-UCF20Z","price":1848.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/9586\/6153\/files\/BFS-3P-FR-UCF20Z-01.jpg?v=1782690152"},{"product_id":"butterfly-system-glanz-3p-aero-set-frp-for-lexus-ls400-ucf20-1998-2000","title":"Butterfly System GLANZ 3P Aero Set (FRP) for Lexus LS400 (UCF20) 1998-2000","description":"\u003ch3\u003e\u003cstrong\u003eButterfly System GLANZ 3P Aero Set (FRP) for Lexus LS400 (UCF20) 1998-2000\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eBuilt to order in Japan by Butterfly System, this Butterfly System GLANZ 3-Piece Aero Kit is part of GLANZ, Butterfly System's core VIP aero line. The set lowers the visual line of the Lexus LS400 \/ Toyota Celsior (UCF20) late with matching front, side and rear pieces.\u003c\/p\u003e\n\u003cp\u003eAll Butterfly System parts ship unpainted in FRP and are made to order. Plan on test-fitting, preparation and paint before installation; an experienced body shop is recommended. Photos show the manufacturer's demo car, which uses two-tone paint and the separately sold LED red lens where applicable.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eIncluded Components\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront half spoiler\u003c\/li\u003e\n\u003cli\u003eSide steps (left and right)\u003c\/li\u003e\n\u003cli\u003eRear half spoiler\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSold Separately\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear wing\u003c\/li\u003e\n\u003cli\u003eDedicated LED red lens for the rear half spoiler center duct (needed to finish the duct as shown on the demo car; requires wiring)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear half spoiler works with the factory muffler.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Butterfly System (Fukuoka, Japan)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e GLANZ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJDM Application:\u003c\/strong\u003e Toyota Celsior 20 Series (UCF20\/21), late model — JDM production Jul 1997 to Aug 2000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUS Application:\u003c\/strong\u003e Lexus LS400 (UCF20), 1998-2000 US model years — designed on the JDM Toyota Celsior; US-market bumpers are not separately confirmed by the manufacturer. Test-fit before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct:\u003c\/strong\u003e Body Kit (3-Piece)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Front half spoiler, Side steps (left and right), Rear half spoiler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e FRP (fiberglass reinforced plastic)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Unpainted; requires paint before installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Professional installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Butterfly System Glanz","offers":[{"title":"Default Title","offer_id":53294416593193,"sku":"BFS-3P-FR-UCF20K","price":1848.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/9586\/6153\/files\/BFS-3P-FR-UCF20K-01.jpg?v=1782690156"},{"product_id":"butterfly-system-glanz-3p-aero-set-frp-for-lexus-ls430-ucf30-2001-2003","title":"Butterfly System GLANZ 3P Aero Set (FRP) for Lexus LS430 (UCF30) 2001-2003","description":"\u003ch3\u003e\u003cstrong\u003eButterfly System GLANZ 3P Aero Set (FRP) for Lexus LS430 (UCF30) 2001-2003\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eMade by Butterfly System in Japan, the Butterfly System GLANZ 3-Piece Aero Kit is part of GLANZ, Butterfly System's core VIP aero line. It gives the Lexus LS430 \/ Toyota Celsior (UCF30) early a lower, cleaner stance with three matched pieces.\u003c\/p\u003e\n\u003cp\u003eAll Butterfly System parts ship unpainted in FRP and are made to order. Plan on test-fitting, preparation and paint before installation; an experienced body shop is recommended. Photos show the manufacturer's demo car, which uses two-tone paint and the separately sold LED red lens where applicable.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eIncluded Components\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront half spoiler\u003c\/li\u003e\n\u003cli\u003eSide steps (left and right)\u003c\/li\u003e\n\u003cli\u003eRear half spoiler\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSold Separately\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear wing\u003c\/li\u003e\n\u003cli\u003eDedicated LED red lens for the rear half spoiler center duct (needed to finish the duct as shown on the demo car; requires wiring)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear half spoiler works with the factory muffler.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Butterfly System (Fukuoka, Japan)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e GLANZ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJDM Application:\u003c\/strong\u003e Toyota Celsior 30 Series (UCF30\/31), early model — JDM production Aug 2000 to Aug 2003\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUS Application:\u003c\/strong\u003e Lexus LS430 (UCF30), 2001-2003 US model years — designed on the JDM Toyota Celsior; US-market bumpers are not separately confirmed by the manufacturer. Test-fit before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct:\u003c\/strong\u003e Body Kit (3-Piece)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Front half spoiler, Side steps (left and right), Rear half spoiler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e FRP (fiberglass reinforced plastic)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Unpainted; requires paint before installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Professional installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Butterfly System Glanz","offers":[{"title":"Default Title","offer_id":53294416625961,"sku":"BFS-3P-FR-UCF30Z","price":1848.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/9586\/6153\/files\/BFS-3P-FR-UCF30Z-01.jpg?v=1782690160"},{"product_id":"butterfly-system-glanz-3p-aero-set-frp-for-lexus-ls430-ucf30-2004-2006","title":"Butterfly System GLANZ 3P Aero Set (FRP) for Lexus LS430 (UCF30) 2004-2006","description":"\u003ch3\u003e\u003cstrong\u003eButterfly System GLANZ 3P Aero Set (FRP) for Lexus LS430 (UCF30) 2004-2006\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThis Butterfly System GLANZ 3-Piece Aero Kit is part of GLANZ, Butterfly System's core VIP aero line. Butterfly System, based in Fukuoka, Japan, designs it around the factory body of the Lexus LS430 \/ Toyota Celsior (UCF30) late so the front, sides and rear share one low VIP profile.\u003c\/p\u003e\n\u003cp\u003eAll Butterfly System parts ship unpainted in FRP and are made to order. Plan on test-fitting, preparation and paint before installation; an experienced body shop is recommended. Photos show the manufacturer's demo car, which uses two-tone paint and the separately sold LED red lens where applicable.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eIncluded Components\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront half spoiler\u003c\/li\u003e\n\u003cli\u003eSide steps (left and right)\u003c\/li\u003e\n\u003cli\u003eRear half spoiler\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSold Separately\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear wing\u003c\/li\u003e\n\u003cli\u003eDedicated LED red lens for the rear half spoiler center duct (needed to finish the duct as shown on the demo car; requires wiring)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear half spoiler works with the factory muffler.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Butterfly System (Fukuoka, Japan)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e GLANZ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJDM Application:\u003c\/strong\u003e Toyota Celsior 30 Series (UCF30\/31), late model — JDM production Aug 2003 to May 2006\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUS Application:\u003c\/strong\u003e Lexus LS430 (UCF30), 2004-2006 US model years — designed on the JDM Toyota Celsior; US-market bumpers are not separately confirmed by the manufacturer. Test-fit before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct:\u003c\/strong\u003e Body Kit (3-Piece)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Front half spoiler, Side steps (left and right), Rear half spoiler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e FRP (fiberglass reinforced plastic)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Unpainted; requires paint before installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Professional installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Butterfly System Glanz","offers":[{"title":"Default Title","offer_id":53294416658729,"sku":"BFS-3P-FR-UCF30K","price":1848.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/9586\/6153\/files\/BFS-3P-FR-UCF30K-01.jpg?v=1782690163"},{"product_id":"butterfly-system-glanz-3p-aero-set-frp-for-toyota-crown-jzs17-1999-2003","title":"Butterfly System GLANZ 3P Aero Set (FRP) for Toyota Crown (JZS17#) 1999-2003","description":"\u003ch3\u003e\u003cstrong\u003eButterfly System GLANZ 3P Aero Set (FRP) for Toyota Crown (JZS17#) 1999-2003\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eBuilt to order in Japan by Butterfly System, this Butterfly System GLANZ 3-Piece Aero Kit is part of GLANZ, Butterfly System's core VIP aero line. The set lowers the visual line of the Toyota Crown (JZS17#) with matching front, side and rear pieces.\u003c\/p\u003e\n\u003cp\u003eAll Butterfly System parts ship unpainted in FRP and are made to order. Plan on test-fitting, preparation and paint before installation; an experienced body shop is recommended. Photos show the manufacturer's demo car, which uses two-tone paint and the separately sold LED red lens where applicable.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eIncluded Components\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront half spoiler\u003c\/li\u003e\n\u003cli\u003eSide steps (left and right)\u003c\/li\u003e\n\u003cli\u003eRear half spoiler\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSold Separately\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear wing\u003c\/li\u003e\n\u003cli\u003eDedicated LED red lens for the rear half spoiler center duct (needed to finish the duct as shown on the demo car; requires wiring)\u003c\/li\u003e\n\u003cli\u003eButterfly System muffler (manufacturer notes competition\/off-road use)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear half spoiler works with the factory muffler.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Butterfly System (Fukuoka, Japan)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e GLANZ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJDM Application:\u003c\/strong\u003e Toyota Crown 17 Series sedan (JZS17#) — JDM model, 1999-2003\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUS Application:\u003c\/strong\u003e Not sold in the US (JDM-only model).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct:\u003c\/strong\u003e Body Kit (3-Piece)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Front half spoiler, Side steps (left and right), Rear half spoiler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e FRP (fiberglass reinforced plastic)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Unpainted; requires paint before installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Professional installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Butterfly System Glanz","offers":[{"title":"Default Title","offer_id":53294416691497,"sku":"BFS-3P-FR-JZS17","price":1932.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/9586\/6153\/files\/BFS-3P-FR-JZS17-01.jpg?v=1782690167"},{"product_id":"butterfly-system-glanz-3p-aero-set-frp-for-toyota-crown-majesta-jzs17-1999-2004","title":"Butterfly System GLANZ 3P Aero Set (FRP) for Toyota Crown Majesta (JZS17#) 1999-2004","description":"\u003ch3\u003e\u003cstrong\u003eButterfly System GLANZ 3P Aero Set (FRP) for Toyota Crown Majesta (JZS17#) 1999-2004\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eMade by Butterfly System in Japan, the Butterfly System GLANZ 3-Piece Aero Kit is part of GLANZ, Butterfly System's core VIP aero line. It gives the Toyota Crown Majesta (17 Series) a lower, cleaner stance with three matched pieces.\u003c\/p\u003e\n\u003cp\u003eAll Butterfly System parts ship unpainted in FRP and are made to order. Plan on test-fitting, preparation and paint before installation; an experienced body shop is recommended. Photos show the manufacturer's demo car, which uses two-tone paint and the separately sold LED red lens where applicable.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eIncluded Components\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront half spoiler\u003c\/li\u003e\n\u003cli\u003eSide steps (left and right)\u003c\/li\u003e\n\u003cli\u003eRear half spoiler\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSold Separately\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear wing\u003c\/li\u003e\n\u003cli\u003eDedicated LED red lens for the rear half spoiler center duct (needed to finish the duct as shown on the demo car; requires wiring)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear half spoiler works with the factory muffler.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Butterfly System (Fukuoka, Japan)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e GLANZ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJDM Application:\u003c\/strong\u003e Toyota Crown Majesta 17 Series — JDM model, 1999-2004\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUS Application:\u003c\/strong\u003e Not sold in the US (JDM-only model).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct:\u003c\/strong\u003e Body Kit (3-Piece)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Front half spoiler, Side steps (left and right), Rear half spoiler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e FRP (fiberglass reinforced plastic)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Unpainted; requires paint before installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Professional installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Butterfly System Glanz","offers":[{"title":"Default Title","offer_id":53294416724265,"sku":"BFS-3P-FR-JZS17M","price":1932.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/9586\/6153\/files\/BFS-3P-FR-JZS17M-01.jpg?v=1782690171"},{"product_id":"butterfly-system-glanz-3p-aero-set-frp-for-toyota-prius-zvw50-2016-2018","title":"Butterfly System GLANZ 3P Aero Set (FRP) for Toyota Prius (ZVW50) 2016-2018","description":"\u003ch3\u003e\u003cstrong\u003eButterfly System GLANZ 3P Aero Set (FRP) for Toyota Prius (ZVW50) 2016-2018\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThis Butterfly System GLANZ FLAP 3-Piece Aero Kit is part of the GLANZ FLAP line, flap-style pieces that mount beneath the factory bumpers and side sills. Butterfly System, based in Fukuoka, Japan, designs it around the factory body of the Toyota Prius (50 Series) early so the front, sides and rear share one low VIP profile.\u003c\/p\u003e\n\u003cp\u003eAll Butterfly System parts ship unpainted in FRP and are made to order. Plan on test-fitting, preparation and paint before installation; an experienced body shop is recommended. Photos show the manufacturer's demo car, which uses two-tone paint and the separately sold LED red lens where applicable.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eIncluded Components\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront protector\u003c\/li\u003e\n\u003cli\u003eSide flap spoilers (left and right)\u003c\/li\u003e\n\u003cli\u003eRear flap spoiler\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSold Separately\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNo optional parts are listed by the manufacturer for this application\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAll parts are add-on types and require drilling the underbody (front also at the wheel house).\u003c\/li\u003e\n\u003cli\u003eFront protector fits over the stock bumper without removing it; vehicles with corner sensors require drilling for the sensors.\u003c\/li\u003e\n\u003cli\u003eApproximate drop vs. stock: front 25 mm, sides 20 mm, rear 30 mm.\u003c\/li\u003e\n\u003cli\u003eRear flap spoiler works with the factory muffler.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Butterfly System (Fukuoka, Japan)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e GLANZ FLAP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJDM Application:\u003c\/strong\u003e Toyota Prius 50 Series (ZVW50\/51\/55), early model — JDM production Dec 2015 to Nov 2018. Not for the late model.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUS Application:\u003c\/strong\u003e Toyota Prius 2016-2018 (ZVW50, pre-facelift). US bumper details not separately confirmed; test-fit before paint. Not for 2019+ facelift or Prius Prime.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct:\u003c\/strong\u003e Body Kit (3-Piece)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Front protector, Side flap spoilers (left and right), Rear flap spoiler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e FRP (fiberglass reinforced plastic)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Unpainted; requires paint before installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Professional installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Butterfly System Glanz","offers":[{"title":"Default Title","offer_id":53294416757033,"sku":"BFS-3P-FR-ZVW50Z","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/9586\/6153\/files\/BFS-3P-FR-ZVW50Z-01.jpg?v=1782690174"},{"product_id":"butterfly-system-glanz-3p-aero-set-frp-for-toyota-prius-zvw60-2023","title":"Butterfly System GLANZ 3P Aero Set (FRP) for Toyota Prius (ZVW60) 2023+","description":"\u003ch3\u003e\u003cstrong\u003eButterfly System GLANZ 3P Aero Set (FRP) for Toyota Prius (ZVW60) 2023+\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eBuilt to order in Japan by Butterfly System, this Butterfly System GLANZ 3-Piece Aero Kit is part of GLANZ, Butterfly System's core VIP aero line. The set lowers the visual line of the Toyota Prius (60 Series) with matching front, side and rear pieces.\u003c\/p\u003e\n\u003cp\u003eAll Butterfly System parts ship unpainted in FRP and are made to order. Plan on test-fitting, preparation and paint before installation; an experienced body shop is recommended. Photos show the manufacturer's demo car, which uses two-tone paint and the separately sold LED red lens where applicable.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eIncluded Components\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront half spoiler\u003c\/li\u003e\n\u003cli\u003eSide flap spoilers (left and right)\u003c\/li\u003e\n\u003cli\u003eRear half spoiler\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSold Separately\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear wing spoiler\u003c\/li\u003e\n\u003cli\u003eOptional rear high-mount LED for the rear half spoiler center duct\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAll parts are add-on types and require drilling.\u003c\/li\u003e\n\u003cli\u003eApproximate drop vs. stock: front 25 mm, sides 25 mm, rear 30 mm.\u003c\/li\u003e\n\u003cli\u003eRear half spoiler works with the factory muffler.\u003c\/li\u003e\n\u003cli\u003eLED wiring may not meet local lighting regulations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Butterfly System (Fukuoka, Japan)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e GLANZ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJDM Application:\u003c\/strong\u003e Toyota Prius 60 Series (MXWH60, MXWH65, ZVW60, ZVW65) — JDM production Dec 2022 onward\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUS Application:\u003c\/strong\u003e Toyota Prius 2023+ (US models use the MXWH60\/MXWH65 chassis codes listed by the manufacturer). US bumper details not separately confirmed; test-fit before paint. Not for Prius Prime (MXWH61), which is not listed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct:\u003c\/strong\u003e Body Kit (3-Piece)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Front half spoiler, Side flap spoilers (left and right), Rear half spoiler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e FRP (fiberglass reinforced plastic)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Unpainted; requires paint before installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Professional installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Butterfly System Glanz","offers":[{"title":"Default Title","offer_id":53294416789801,"sku":"BFS-3P-FR-ZVW60","price":2247.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/9586\/6153\/files\/BFS-3P-FR-ZVW60-01.jpg?v=1782690178"},{"product_id":"butterfly-system-glanz-krone-3p-aero-set-frp-for-lexus-ls430-ucf30-2001-2003","title":"Butterfly System GLANZ KRONE 3P Aero Set (FRP) for Lexus LS430 (UCF30) 2001-2003","description":"\u003ch3\u003e\u003cstrong\u003eButterfly System GLANZ KRONE 3P Aero Set (FRP) for Lexus LS430 (UCF30) 2001-2003\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eMade by Butterfly System in Japan, the Butterfly System GLANZ KRONE 3-Piece Aero Kit is part of the GLANZ KRONE design, a separate GLANZ styling for the 30 Celsior that differs from the standard GLANZ kit. It gives the Lexus LS430 \/ Toyota Celsior (UCF30) early a lower, cleaner stance with three matched pieces.\u003c\/p\u003e\n\u003cp\u003eAll Butterfly System parts ship unpainted in FRP and are made to order. Plan on test-fitting, preparation and paint before installation; an experienced body shop is recommended. Photos show the manufacturer's demo car, which uses two-tone paint and the separately sold LED red lens where applicable.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eIncluded Components\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront half spoiler\u003c\/li\u003e\n\u003cli\u003eSide steps (left and right)\u003c\/li\u003e\n\u003cli\u003eRear half spoiler\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSold Separately\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear wing\u003c\/li\u003e\n\u003cli\u003eDedicated LED red lens for the rear half spoiler center duct (needed to finish the duct as shown on the demo car; requires wiring)\u003c\/li\u003e\n\u003cli\u003eOptional rear low-mount LED\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront half spoiler is an add-on part; requires drilling and fitting adjustment.\u003c\/li\u003e\n\u003cli\u003eSide steps are a replacement type (they replace the factory side panels) and require fitting adjustment; professional installation recommended.\u003c\/li\u003e\n\u003cli\u003eRear half spoiler is an add-on part; requires drilling and fitting adjustment and works with the factory muffler.\u003c\/li\u003e\n\u003cli\u003eLED lens wiring may not meet local lighting regulations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Butterfly System (Fukuoka, Japan)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e GLANZ KRONE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJDM Application:\u003c\/strong\u003e Toyota Celsior 30 Series (UCF30\/31), early model — JDM production Aug 2000 to Aug 2003. NOTE: the manufacturer's KRONE parts list shows the front and rear half spoilers as late-model (Aug 2003+) parts; only the side steps are listed for early and late cars. Confirm with PMD before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUS Application:\u003c\/strong\u003e Lexus LS430 (UCF30), 2001-2003 US model years — not separately confirmed by the manufacturer. Test-fit before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct:\u003c\/strong\u003e Body Kit (3-Piece)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Front half spoiler, Side steps (left and right), Rear half spoiler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e FRP (fiberglass reinforced plastic)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Unpainted; requires paint before installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Professional installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Butterfly System Glanz","offers":[{"title":"Default Title","offer_id":53294416822569,"sku":"BFS-3PK-FR-UCF30Z","price":2247.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/9586\/6153\/files\/BFS-3PK-FR-UCF30Z-01.jpg?v=1782690181"},{"product_id":"butterfly-system-glanz-krone-3p-aero-set-frp-for-lexus-ls430-ucf30-2004-2006","title":"Butterfly System GLANZ KRONE 3P Aero Set (FRP) for Lexus LS430 (UCF30) 2004-2006","description":"\u003ch3\u003e\u003cstrong\u003eButterfly System GLANZ KRONE 3P Aero Set (FRP) for Lexus LS430 (UCF30) 2004-2006\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThis Butterfly System GLANZ KRONE 3-Piece Aero Kit is part of the GLANZ KRONE design, a separate GLANZ styling for the 30 Celsior that differs from the standard GLANZ kit. Butterfly System, based in Fukuoka, Japan, designs it around the factory body of the Lexus LS430 \/ Toyota Celsior (UCF30) late so the front, sides and rear share one low VIP profile.\u003c\/p\u003e\n\u003cp\u003eAll Butterfly System parts ship unpainted in FRP and are made to order. Plan on test-fitting, preparation and paint before installation; an experienced body shop is recommended. Photos show the manufacturer's demo car, which uses two-tone paint and the separately sold LED red lens where applicable.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eIncluded Components\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront half spoiler\u003c\/li\u003e\n\u003cli\u003eSide steps (left and right)\u003c\/li\u003e\n\u003cli\u003eRear half spoiler\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSold Separately\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear wing\u003c\/li\u003e\n\u003cli\u003eDedicated LED red lens for the rear half spoiler center duct (needed to finish the duct as shown on the demo car; requires wiring)\u003c\/li\u003e\n\u003cli\u003eOptional rear low-mount LED\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront half spoiler is an add-on part; requires drilling and fitting adjustment.\u003c\/li\u003e\n\u003cli\u003eSide steps are a replacement type (they replace the factory side panels) and require fitting adjustment; professional installation recommended.\u003c\/li\u003e\n\u003cli\u003eRear half spoiler is an add-on part; requires drilling and fitting adjustment and works with the factory muffler.\u003c\/li\u003e\n\u003cli\u003eLED lens wiring may not meet local lighting regulations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Butterfly System (Fukuoka, Japan)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e GLANZ KRONE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJDM Application:\u003c\/strong\u003e Toyota Celsior 30 Series (UCF30\/31), late model — JDM production Aug 2003 to May 2006\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUS Application:\u003c\/strong\u003e Lexus LS430 (UCF30), 2004-2006 US model years — designed on the JDM Toyota Celsior; US-market bumpers are not separately confirmed by the manufacturer. Test-fit before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct:\u003c\/strong\u003e Body Kit (3-Piece)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Front half spoiler, Side steps (left and right), Rear half spoiler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e FRP (fiberglass reinforced plastic)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Unpainted; requires paint before installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Professional installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Butterfly System Glanz","offers":[{"title":"Default Title","offer_id":53294416888105,"sku":"BFS-3PK-FR-UCF30K","price":2247.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/9586\/6153\/files\/BFS-3PK-FR-UCF30K-01.jpg?v=1782690184"},{"product_id":"butterfly-system-glanz-ver2-3p-aero-set-frp-for-toyota-aristo-jzs16-1998-2005","title":"Butterfly System GLANZ Ver2 3P Aero Set (FRP) for Toyota Aristo (JZS16#) 1998-2005","description":"\u003ch3\u003e\u003cstrong\u003eButterfly System GLANZ Ver2 3P Aero Set (FRP) for Toyota Aristo (JZS16#) 1998-2005\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eBuilt to order in Japan by Butterfly System, this Butterfly System GLANZ Ver.2 3-Piece Aero Kit is the Ver.2 GLANZ design Butterfly System offers for the 16 Aristo. The set lowers the visual line of the Toyota Aristo (JZS160\/161) with matching front, side and rear pieces.\u003c\/p\u003e\n\u003cp\u003eAll Butterfly System parts ship unpainted in FRP and are made to order. Plan on test-fitting, preparation and paint before installation; an experienced body shop is recommended. Photos show the manufacturer's demo car, which uses two-tone paint and the separately sold LED red lens where applicable.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eIncluded Components\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront half spoiler\u003c\/li\u003e\n\u003cli\u003eSide steps (left and right)\u003c\/li\u003e\n\u003cli\u003eRear half spoiler\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSold Separately\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear wing\u003c\/li\u003e\n\u003cli\u003eDedicated LED red lens for the rear half spoiler center duct (needed to finish the duct as shown on the demo car; requires wiring)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear half spoiler works with the factory muffler.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Butterfly System (Fukuoka, Japan)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e GLANZ Ver.2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJDM Application:\u003c\/strong\u003e Toyota Aristo 16 Series (JZS160\/161) — JDM production Aug 1997 to Dec 2004.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUS Application:\u003c\/strong\u003e Lexus GS300\/GS400\/GS430, 1998-2005 US model years, is the US-market version of this body. The manufacturer lists the JDM Aristo only, and US bumper and lighting details may differ. Test-fit before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct:\u003c\/strong\u003e Body Kit (3-Piece)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Front half spoiler, Side steps (left and right), Rear half spoiler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e FRP (fiberglass reinforced plastic)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Unpainted; requires paint before installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Professional installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Butterfly System Glanz","offers":[{"title":"Default Title","offer_id":53294416953641,"sku":"BFS-3P-FR-JZS16","price":1932.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/9586\/6153\/files\/BFS-3P-FR-JZS16-01.jpg?v=1782690188"}],"url":"https:\/\/pmddriven.com\/collections\/butter-fly-lexus-toyota.oembed","provider":"PMD Premier Motoring Development","version":"1.0","type":"link"}